How to Set Up a Fishing Pole: 4 Quick Steps

The success of your fishing activity often depends on how well you set up the fishing pole. If you can set it up correctly, there is no doubt you would end up with a great fishing experience.

Anyone who has tried setting up a fishing pole understands that it can be quite a tough experience. This is because it would take more time and can make you rethink your fishing trip. However, it does not always have to be hard as if you have the right procedure.

This guide looks at how to set up a fishing pole and have a good time fishing. Let us get started already.

Step 1: Get all the Necessary Fishing Equipment

Start by gathering everything you will need for setting up a fishing pole. Some of the things to get include;

  • Spinning reel: you can get it from different shops or online shops that sell fishing equipment. This will ensure that you can have the fishing pole setup using the right spinning reel.
  • Spinning rod: the spinning rods should be able to work with your spinning reels. It is best to ask for a spinning rod that is compatible with your spinning reel as directed by the manufacturer.
  • Fishing line: a fishing pole would not be complete without a fishing line. It is crucial to get yourself a nice fishing line that can deliver on the best performance based on the fish you will be trying to catch. As such, you may have to research more about the fishing line types.
  • Bait or lure: the bait that you choose is also mostly determined by the type of fish you prefer catching. You may have to buy multiple baits to ensure that you are also flexible enough to catch different fish types.
  • Scissors: Any type of scissors will come in handy to use when you have to cut a line or something else.

Step 2: Assemble the Reel and Rod

The second step is to start the assembly process. Keep in mind that a fishing pole can quickly get complicated if it is the first time you are using it. It is wise to take your time during this stage of setting up a fishing pole.

If you have a rod with two parts or even more, you will start by joining these parts into one. The parts would have joints called ferrule. The male ferrule will insert into the female ferrule. Just make sure the parts slide into each other according to the design.

It is vital to clean the rod before assembling it. Use a cloth to remove debris or dirt that might have accumulated on the rod over time. The dirt and grime can easily destroy the pieces as you set them up.

Now that the rod is fully assembled proceed to attach the reel. When you look at the bottom of the fishing rod, you will see an opening where you can insert the reel. This opening is referred to as the reel seat.

Once you have put the reel in its position, there are two adjusters you will use to hold the reel in place. Thread them onto the reel until you feel the pieces are secure. No need to overtighten.

Step 3: Threading the Fishing Pole

Start by lifting the reel’s bale arm and then pull the thread. The bale arm can be described as the silver overhead material found on the reel. You are required to use only less pressure when lifting this arm. Using too much pressure can lead to damage.

Once you lift the bale arm, you can now pull the thread’s edge, and the reel will easily unravel it.

Look at how the spool of your line is moving. It should unwind in the same direction as your reel. If they seem to be in different directions, the chances are you have knots and twists that should be addressed.

Now that the line is attached to the reel, you also have to thread it through the fishing pole’s guides. Most fishing rods have up to five guides. Feed the guide closest to the reel and move your way up to the last guide at the top of your fishing rod.

With everything now set up right, proceed to close the reel’s bale arm. You simply have to flip it to the opposite side, and you are good to go.

Step 4: Choosing and Attaching the Best Lure

Now that you are at this stage, you have to consider the type of lure you get. The first consideration is color. You could consider picking the right color to ensure that it works based on the conditions for the day. A good example is that you can opt for silver on sunny days and gold on a cloudy day.

Other than the color, you also have to consider the type of fish you are going to catch. There might be all-purpose lures in the market, but you are better off sticking to something specific to ensure you get the best fishing experience too.

Now that you have the best lure or bait proceed to attach it to your fishing pole.

Thread your fishing line through the lure. You should leave around ten inches of the line after threading it through the lure. Make sure that you also tie a knot after threading the fishing line through the lure. You may have to practice different knots to ensure you get it right always.

With the lure securely attached to the line and fishing pole, you should be ready to start fishing.


As you can see, it is not hard to set up a fishing pole. You can be sure that the fishing pole you set up will generally give you the best performance once you get everything done right. You can still check out some YouTube videos to see what other people are doing overall. This will definitely make it easy for you to set up your fishing pole with ease.

Leave a Comment